Possible Causes:

1. Low pressure nozzle installed
2. Water inlet is obstructed
3. Inadequate water supply
4. Inlet hose kinked or leaking
5. Clogged hose inlet screen
6. Water supply is over 100ºF (37.8ºC)
7. High-pressure hose is obstructed, or leaks
8. Spray gun leaks
9. Nozzle is obstructed
10. Pump is faulty
11. Dirty fuel filter

Possible Solutions:

1. Replace with high-pressure nozzle
2. Clean inlet
3. Provide adequate water flow
4. Straighten inlet hose, patch leak
5. Inspect and clean inlet hose screen
6. Provide cooler water supply
7. Clear obstructions or replace hose
8. Replace spray gun
9. Clean nozzle
10. Call us an Authorized Online Service Facility
11. Replace fuel filter

Possible Causes:

1. Detergent siphoning tube is not submerged
2. Detergent siphoning tube/filter is obstructed or cracked
3. High-pressure nozzle installed

Possible Solutions:

1. Insert detergent siphoning tube into detergent
2. Clean or replace filter/detergent siphoning tube
3. Install low-pressure nozzle

Possible Causes:

1. Engine speed too low
2. Dirty fuel filter

Possible Solutions:

1. Call us an Authorized Online Service Facility
2. Replace fuel filter

Possible Causes:

1. Dirty air filter
2. Out of fuel
3. Stale fuel
4. Spark plug wire not connected to plug
5. Bad spark plug
6. Water in fuel
7. Excessively rich fuel mixture
8. Dirty fuel filter

Possible Solutions:

1. Clean or replace air filter
2. Fill fuel tank
3. Replace with fresh fuel
4. Connect wire to spark plug
5. Replace spark plug
6. Drain fuel tank, replace with fresh fuel
7. Call us an Authorized Online Service Facility
8. Replace fuel filter

Possible Causes:

1. Out of fuel

Possible Solutions:

1. Fill fuel tank

Possible Causes:

1. Dirty air filter.
2. Rusted seized up pump

Possible Solutions:

1. Overloaded the Generator
2. Call us an Authorized Online Service Facility.